Prepare the Parts

The first steps are identical independent of the actual robot used for the build. You will update and configure the GPS, flash the OS to your Compute Module, and put all modules on the mainboard.

Step 2.1: Prepare the GPS

Update Firmware and configure the GPS modules.

Step 2.2: Prepare the SD Card

In this step we will install OpenMower OS on the SD card.

Step 2.3: Prepare the Mainboard

Prepare the mainboard by adding all modules into their respective slots.

Last modified December 4, 2025: Renamed URL, added external antenna info (5b31b2e)